Buy LC80-2507 CRA Line Pipe and API 5LC corrosion resistance alloy line pipe at best prices
High corrosion-resistant materials, such as austenitic stainless steels, titanium alloys, and duplex steel materials, are used to make API 5LC CRA Line Pipe. The Lc52-1200 and other grades outline the pipe's mechanical characteristics, material composition, and other details. To reduce corrosion, these are employed as line pipes and clad pipes. There are sizes available for the API 5LC Lc30-1812 CRA Line Pipe ranging from 6 inches to 60 inches. The pipes come in a variety of diameters, with nominal bores ranging from 4 inches to 24 inches. To provide further strength and hardness, the CRA Materials can be rolled, inflated, and heated. Depending on the pipes' outer diameter, the wall thickness might range from 4 inches to 60 inches. To prevent corrosion, pipelines made of various materials are covered with CRA Clad Line Pipe. These kinds of pipes are used in environments and applications with extremely corrosive elements. The pipe can be produced with an expansion joint, repair welding, or heat treatment. The CRA Line Pipe is available in a variety of material classifications, including LC30-1812, LC65-2205, and others. The minimum yield strength and tensile strength of the pipes differ with the material types. The minimum yield and tensile strengths of the pipes vary depending on the type of material. The minimum yield strengths of API 5LC Corrosion Resistance Alloy Line Pipe range from 207 MPa to 552 MPa, while the minimum tensile strengths range from 482 MPa to 758 MPa. The American Petroleum Industry has certified these pipes. While the nominal bore size of line pipes can go up to 24 inches, that of clad pies can go up to 60 inches.
API 5LC CRA Line Pipe
Lc52-1200 Seamless Tube
Lc30-1812 CRA Line Pipe
Different Types of API 5LC CRA Line Pipe
API 5LC Cra Seamless Ssaw Welding Line Pipe
Lc65-2506 Cra Line Pipes
Api Spec 5lc Cra Stainless Steel Pipes
API 5LC Corrosion Resistance Alloy Line Pipes
API 5LC Lc30-1812 Cra Line Pipes
API 5LC Cra Line Pipe
Welded 5lc Cra Tubing
API 5LC Seamless Tube
Buy Directly From Manufacturer Of API 5LC Lc30-1812 CRA Line Pipe Online And Save Cost
Specification chart of Lc52-1200
API 5LC CRA LINE PIPES SPECIFICATIONS |
||
|---|---|---|
| API 5LC CRA Line Outer Diameter | 6” to 60” | |
| OD range for CRA lined pipe | 2” to 24” | |
| API 5LC CRA Line Maximum length | 12.3 meter | |
| API 5LC CRA Line Thickness | Up to 80 mm (Clad pipe), 7 mm to 35 mm (For lined pipe) | |
| Cladding and Lining CRA (Corrosion resistant alloy) material | Austenitic stainless steel, nickel alloy steel, Hastelloy C276, titanium alloy steel duplex steel, and etc. | |
CRA Materials Mechanical Properties Table
| Grade | Yield strength, min. | Tensile strength, min. | Elongation, min. Percent in 2 in. | UNS Numbers | ||
|---|---|---|---|---|---|---|
| psi | MPa | psi | MPa | |||
| API LC30-1812 | 30,000 | 207 | 70,000 | 482 | 25 | S31603 S31653 |
| API LC65-2205 | 65,000 | 448 | 90,000 | 621 | 25 | S31803 |
| API LC65-2506 | 65,000 | 448 | 95,000 | 656 | 25 | S31260 |
| API LC80-2507 | 80,000 | 552 | 110,000 | 758 | 20 | S39274 S32760 S32750 |
Check Size Chart of CRA Clad Line Pipe and CRA Materials
CRA Line Pipe Size in MM
| Nominal O.D. | Nominal W.T.(total thickness), mm | Nominal W.T.(total thickness), mm | Pipe length, m | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NPS | inch | mm | 4 | 5 | 6 | 7 | 8 | 9 | … | 17 | 19 | 22 | 25 | 31 | 33 | 35 | 40 | 45 | 50 | 54 | 60 | API 5LD | DNV OS-F101 | CJ/T192 | |
| 4 | 4.500 | 114.3 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | 2.5 | 2.5 | 1.2 | 8.0-12.5 | |||||||||||
| 5 | 5.563 | 141.3 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||||||||||||
| 6 | 6.625 | 168.3 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |||||||||||||
| 8 | 8.625 | 219.1 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |||||||||||||
| 10 | 10.750 | 273 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||||||||||
| 12 | 12.750 | 273 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |||||||||||
| 14 | 14 | 355.6 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | 1.5 | |||||||||
| 16 | 16 | 406.4 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||||||||
| 18 | 18 | 457 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | 1.8 | |||||||||
| 20 | 20 | 508 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||||||||
| 22 | 22 | 559 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | 2.0 | |||||||||
| 24 | 24 | 610 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||||||||
| Nominal W.T., mm | 4 | 5 | 6 | 7 | 8 | 9 | … | 17 | 19 | 22 | 25 | 31 | 33 | 35 | 40 | 45 | 50 | 54 | 60 | Cladding min. thickness, mm | |||||
| Remarks: 1) Special sizes may be agreed upon between the manufacturer and the purchaser; 2) The min. thickness of the cladding may be agreed upon between the manufacturer and the purchaser. | |||||||||||||||||||||||||
API 5LC Lc30-1812 CRA Line Pipe Material
| API LC30-1812 | S31603/S31653 |
| API LC65-2205 | S31803 |
| API LC65-2506 | S31260 |
| API LC80-2507 | S39274 |
| S32760 | |
| S32750 |
Check Dimension Chart Of CRA Line Pipe, Stockist Of cra lined pipes
CRA Clad Line Pipe Dimension Chart
| Outside Diameter | Wall Thickness |
|---|---|
| 33.4 mm - 813 mm | 3.4 mm - 31.8 mm |