Supplier of En 10025 Seamless Pipes for chemical, marine, oil and gas industry
Carbon, silicon, manganese, phosphorus, and sulphur are all elements found in the carbon steel used to make En 10025 Pipes. Of the entire weight, carbon makes up 0.2%. Seamless and welded construction are used to create EN 10025 Steel Pipes. The En 10025 Seamless Pipes have lower absolute roughness and smaller diameters than the welded pipes, which have bigger diameters and higher absolute roughness. In contrast to how welded pipes are created from plates to create the BS 10025 Wn 1.0570 Round Pipe, seamless pipes are cold drawn or hot rolled from the raw material. There are square, rectangular and hydraulic pipe types available as well. The diameter of the Werkstoff Nr En 10025 Welded Pipe ranges from 5mm to 1219.2mm and the diameter of the seamless pipes ranges from 4mm to 219mm. The standard wall thicknesses are from 0.5mm to 20mm for the En 10025 S275 Seamless Tube, pipe and welded tubular products, but the thicknesses can go over 100mm depending on the application requirements. The En 10025-3 Pipes also have schedules from sch5 through XXS. The En 10025-3 Square Pipes is used for structural applications where light weight is preferred. The square shape provides extra strength. The En 10025 ERW Pipes is used in high pressure, high temperature applications. There are also hydraulic, square, and rectangular pipe kinds available. The seamless pipes' diameter spans from 4mm to 219mm, while the Werkstoff Nr En 10025 Welded Pipe has a diameter range of 5mm to 1219.2mm. For the En 10025 S275 Seamless Tube, pipe, and welded tubular products, the usual wall thicknesses are from 0.5mm to 20mm; however, depending on the application needs, the thicknesses can go over 100mm. Schedules for the En 10025-3 Pipes range from sch5 to XXS. For structural applications where minimal weight is preferred, En 10025-3 square pipes are employed. Extra strength is provided by the square shape. Applications requiring high pressure and high temperature employ En 10025 ERW Pipes.
EN 10025 Steel Pipe
Structural Steel Tubes EN 10025 S235J2
Grade S235JR EN 10025 Seamless Pipes
Table of contents
- En 10025 Pipe Chemical Composition
- EN 10025 Steel Pipe Different Types
- En 10025 Seamless Pipes Mechanical Properties
- En 10025 Wn 1.0570 Round Pipe Equivalent
- Werkstoff Nr En 10025 Welded Pipe Specification chart
- yield Chart of En 10025 S275 Seamless Tube
- En 10025-3 Pipes Tolerance
- En 10025-3 Square Pipe Dimension Length
- En 10025 ERW Pipe Price List
- Bs En 10025 Hot Rolled Pipe Size Chart
- En 10025 Cold Drawn Tube Size
We Keep Bulk Stock of Werkstoff Nr En 10025 Welded Pipe at our stockyard, contact us for Free Sample & stock list
En 10025 Pipe Chemical Composition
| Carbon | Silicon | Manganese | Phosphorous | Sulphur | Molybdenum | Nickel | Chromium | Copper | Others |
|---|---|---|---|---|---|---|---|---|---|
| Maximum 0.20 | Maximum 0.55 | Maximum 1.60 | 0.035 | 0.035 | - | - | - | - | - |
EN 10025 Steel Pipe Different Types
BS EN 10025 rectangular steel pipe
DIN EN 10025 ST52.3 Seamless Steel Pipe
cold rolling EN 10025 s275jr structural steel pipe
Black EN 10025 s275jr ms structural steel pipe
EN 10025 structural carbon steel pipe
SS En 10025 S275Jr Structural Steel Pipe
EN 10025 p235tr1 grade C steel pipe
6 Inch Casing En 10025 Structural Steel Pipe
En 10025 S355jo Od 2032mm Hollow Steel Pipe
See En 10025-3 Pipes Properties, En 10025 Wn 1.0570 Round Pipes available for online order, buy at dealer price in India
En 10025 Seamless Pipes Mechanical Properties
| Tensile Strength | Elongation | ||
|---|---|---|---|
| megapascal Minimum | megapascal Minimum | ksi Minimum | Percentage |
| 490 | 630 | – | – |
En 10025 Wn 1.0570 Round Pipe Equivalent
| Director Identification Number | European Standards | British Standards |
|---|---|---|
| DIN 23932 / 23942 | EN 10025 Grade S355J2G3 | NFA A49 643 Grade TS 47 2 |
Check En 10025 Cold Drawn ERW Pipe Weight Chart and Specification Online
Werkstoff Nr En 10025 Welded Pipe Specification chart
| Standard No | EN 10025 |
|---|---|
| Outside Diameter in MM | 21.3 To 457.2 |
| Wall Thickness in MM | 1.8 To 14.27 |
| Circular Dimension Range in MM | 26.9 To 323.9 |
| Square Dimension Range in MM | 25*25 To 300*300 |
| Rectangular Dimension Range in MM | 40*20 to 400*200 |
| Pipe Marking | All Pipe are marked as follows: Supplier or Manufacturer’s Name, Standard, Grade, OD, Thickness, Length, Heat Number |
| Length in Mm | 6000 To 12 000/18 000 |
| Schedule | Schedule XS, Schedule 160, Schedule 40, Schedule XXS, Schedule 80 Supplier and Manufacturer |
| Supplier & Distributors Located in | Pimpri Chinchwad, Melbourne, Mumbai, Manama, Calgary, Kolkata, Abu Dhabi, Gimhae si, Chennai, Thiruvananthapuram, Mexico, Santiago, Montreal, Noida, Hyderabad, Lagos, Janeiro, India, Baroda, Gujarat, Howrah, Sydney, Ernakulam, Jamshedpur, Bangalore, Dammam, Rajkot, Tau, Kanpur, Ludhiana, Ankara, Riyadh, Perth, Surat, Port of Spain, Bogota, Gurgaon, Muscat, Ahmedabad, Coimbatore, Courbevoie, Kuwait, New Delhi, Ludhiana, Khobar, Indore, Tehran, Karachi, Vadodara, Ahvaz, Ranchi, Nagpur, Caracas, London, Istanbul, Bengaluru |
yield Chart of En 10025 S275 Seamless Tube
EN 10025-2
| S235JR | 1.0038 | S275JR | 1.0044 | S355JR | 1.0045 | E295 | 1.0050 |
| S235J2 | 1.0117 | S275J2 | 1.0144 | S355J2 | 1.0577 | E360 | 1.0070 |
| S235J0 | 1.0114 | S275J0 | 1.0143 | S355J0 | 1.0553 | E335 | 1.0060 |
EN 10025-3
| S275NL | 1.0491 | S355NL | 1.0546 | S420NL | 1.8912 | S460NL | 1.8903 |
| S275N | 1.0490 | S355N | 1.0545 | S420N | 1.8902 | S460N | 1.8901 |
EN 10025-4
| S275ML | 1.8819 | S355ML | 1.8834 | S420ML | 1.8836 | S460ML | 1.8838 |
| S275M | 1.8818 | S355M | 1.8823 | S420M | 1.8825 | S460M | 1.8827 |
EN 10025-5
| S235J2W | 1.8961 | S355J2WP | 1.8946 | S355J2W | 1.8965 | ||
| S235J0W | 1.8958 | S355J0WP | 1.8945 | S355J0W | 1.8959 | S355K2W | 1.8967 |
EN 10025-6
| S460QL | 1.8906 | S550Q | 1.8904 | S620QL1 | 1.8987 | S890QL | 1.8983 |
| S460Q | 1.8908 | S500QL1 | 1.8984 | S620QL | 1.8927 | S890Q | 1.8940 |
| S460QL1 | 1.8916 | S550QL | 1.8926 | S690Q | 1.8931 | S890QL1 | 1.8925 |
| S500QL | 1.8909 | S620Q | 1.8914 | S690QL1 | 1.8988 | ||
| S500Q | 1.8924 | S550QL1 | 1.8986 | S690QL | 1.8928 |
En 10025-3 Pipes Tolerance
| Execution | Size Range in MM | Outer Diameter Tolerance in MM | Wall tolerance in MM |
|---|---|---|---|
| Hot rolled peeled tube | All sizes Wall < 12 Wall To 12 | + 0.25/- 0 | ± 0.8 ± (5 % x wall thickness+ 0.2 ) |
| Hot rolled Tube | Outer Diameter – 80 Outer Diameter > 80 Wall < 12 Wall - 12 | ± 0.4 ± 0.5 % of Outer Diameter | ± 0.7 ± (5 % x wallthickness + 0.1 |
| Cold Worked tube cold rolled or cold drawn | Outer Diameter < 40 Outer Diameter 40 - 80 Outer Diameter > 80 Wall Thickness < 6 Wall Thickness 6 To 8 Wall Thickness > 8 | + 0.30/- 0 *+ 0.35/- 0 *+ 0.40/- 0 * | ± 0.30 ± 0.35 ± 0.40 |
En 10025-3 Square Pipe Dimension Length
| Component length in MM | Outer Diameter 30 To 100 | Outer Diameter 100 To 254 |
|---|---|---|
| 1200 To 5000 | + 5.0/- 0 | + 6.0/- 0 |
| 10 To 100 | + 1.0/- 0 | + 2.0/- 0 |
| 600 To 1200 | + 3.0/- 0 | + 4.0/- 0 |
| 100 To 600 | + 2.0/- 0 | + 3.0/- 0 |
En 10025 ERW Pipe Price List
| EN 10025 Grade S355J2G3 Pipe | Price in INR | Price in Saudi Riyal | Price in UAE Dirham |
|---|---|---|---|
| En 10025 Grade S355j2g3 Pipe Price in India | Rs.46512 | Saudi Riyal 2438.16 | UAE Dirham 2388.48 |
| CS En 10025 Grade S355j2g3 Seamless Pipe Cost in Mumbai | Rs.35778 | Saudi Riyal 1875.48 | UAE Dirham 1837.27 |
| Price of En 10025-2 S275jr Steel Pipe in Mumbai | Rs.39356 | Saudi Riyal 2063.04 | UAE Dirham 2021.00 |
Always refer Bs En 10025 Hot Rolled Pipe Size and Schedule Chart before buy En 10025-3 Square Tube
Bs En 10025 Hot Rolled Pipe Size Chart
| 1/8 Inch IPS(.405 Inch Outer Diameter) | 3 1/2 Inch IPS( 4.000 Inch Outer Diameter) |
| 3/8 Inch IPS(.675 Inch Outer Diameter) | 5 Inch IPS( 5.563 Inch Outer Diameter) |
| Schedule 40, 80 | Schedule 10, 40, 80, 160, XXH |
| 1/4 Inch IPS(.540 Inch Outer Diameter) | 4 Inch IPS(4.500 Inch Outer Diameter) |
| Schedule 10, 40, 80 | Schedule 10, 40, 80, 160, XXH |
| Schedule 10, 40, 80, 160, XXH | Schedule-40 (.375) |
| Schedule 10, 40, 80 | Schedule 10, 40, 80, 160, XXH |
| 1/2 Inch IPS(.840 Inch Outer Diameter) | 6 Inch IPS(6.625 Inch Outer Diameter) |
| Schedule 5, 10, 40, 80, 160, XXH | Schedule 5, 10, 40, 80, 120, 160, XXH |
| 3/4 Inch IPS(1.050 Inch Outer Diameter) | 8 ” IPS(8.625 Inch Outer Diameter) |
| Schedule 10, 40, 80, 160, XXH | Schedule 5, 10, 40, 80, 120, 160, XXH |
| 1 Inch IPS:(1.315′ Outer Diameter) | 10 Inch IPS(10.750 Inch Outer Diameter) |
| Schedule 5, 10, 40, 80, 160, XXH | Schedule 10, 20, 40, 80 (.500), TRUE 80(.500) |
| 2 Inch IPS(2.375 Inch Outer Diameter) | 16 Inch IPS(16.000 Inch Outer Diameter) |
| 1-1/4 Inch IPS(1.660 Inch Outer Diameter) | 12 Inch IPS(12.750 Inch Outer Diameter) |
| 1-1/2 Inch IPS(1.900 Inch Outer Diameter) | 14 Inch IPS(14.000 Inch Outer Diameter) |
| Schedule 10, 40, 80, 160, XXH | Schedule10 (.188), Schedule40 (.375) |
| Schedule 10, 40, 80, 160, XXH | Schedule 10, 20, 40(.375), TRUE40(.406), Schedule80(.500) |
| Schedule 10, 40, 80, 160, XXH | Schedule10(.188), Schedule40(.375) |
| 2 1/2 Inch IPS(2.875 Inch Outer Diameter) | 18 Inch IPS (18.000 Inch Outer Diameter) |
| 3 Inch IPS( 3.500 Inch Outer Diameter) | Schedule 5, 10, 40, 80, 160, XXH |
En 10025 Cold Drawn Tube Size
| Wall Thickness | Outer Diameter Sizes in Inch |
|---|---|
| .012 | 1/8 |
| .010 | 1/8, 1/16, 3/16 |
| .065 | 3/4, 2 1/2, 1 1/4, 1 5/8, 1/2, 5/16, 7/8, 1, 1 3/4, 3/8, 16, 5/8, 1 1/2, 2, 3, 1/4 |
| .020 | 1/16, 3/8, 5/16, 1/4, 1/8, 3/16 |
| .125 | 3, 3/4, 1 1/4, 1, 1 1/2, 3 1/4, 2 |
| .120 | 1 1/2, 1/2, 2, 3/4, 3, 2 1/4, 1, 5/8, 2 1/2, 7/8, 1 1/4 |
| .016 | 1/8, 3/16 |
| .028 | 3/16, 3/8, 5/16, 3/4, 1 1/2, 1/2, 1/4, 1, 2, 1/8 |
| .035 | 1/4, 5/8, 3/4, 3/8, 2 1/4, 16, 3/16, 1 5/8, 1/2, 2, 7/16, 5/16, 1, 1/2, 7/8, 1 1/4, 1/8, 1 |
| .134 | 1 |
| .049 | 1 5/8, 2, 1 1/8, 1 1/4, 5/16, 3/4, 2 1/4, 1, 5/8, 1/2, 16, 3/16, 7/8, 3/8, 1/4, 1 1/2 |
| .083 | 3/4, 1 1/4, 1/2, 1/4, 5/8, 7/8, 2 1/2,3, 1 7/8, 1, 1 5/8, 3/8, 1 1/2, 2 |
| .095 | 1, 1-1/4, 1-1/2, 5/8, 2, 1/2, |
| .109 | 1/2, 1, 2, 1-1/4, 3/4, 1-1/2, |
| .250 | 3 |
| .375 | 3 1/2 |