EN 10219 S355JRH Hollow Section, En 10219 S355JRH RHS manufacturer in India
Carbon steel with the following elements in its composition: carbon, silicon, manganese, phosphorus, sulphur, and niobium is used to make EN 10219 S355JRH Welded Steel Pipe. For various grades, mild carbon steel has varying dimensions. The outside diameters of the pipes of the structural steel pipe EN 10219 S355JRH grade range from 21.3mm to 457.2mm, and the wall thicknesses range from 1.8mm to 14.27mm. The pipes' circumferences range from 26.9mm to 323.9mm. This grade includes tubes, square pipes, rectangular pipes, and circular pipes. During manufacture, the pipes could be welded or seamless. The sheets and plates used to create the EN 10219 S355JRH LSAW Welded Steel Pipe are of the same material grade. The size of the welded square pipes range from 25x25mm to 300x300mm. The pipes are available in single random, double random, and custom cut to length sizes, with lengths ranging from 6000mm to 18000mm. Additionally, the substance has a minimum yield strength of 355 MPa and a minimum tensile strength of up to 680 MPa with 20% elongation at break. When structural elements are required but the weight needs to be minimised, the S355JRH Hollow Section is a wise choice. Additional strength is provided by the shape's hollow square section. The EN 10219 S355JRH is available with a variety of pipe ends and coating choices. Corrosion can be avoided, and the coating can boost resistance to wear and tear.
EN 10219 LSAW Welded Steel Pipe
EN 10219 S355JRH Seamless Steel Pipe
EN 10219 S355JRH Hollow Section
Table of contents
We stock and produce EN 10219 S355JRH LSAW Pipes in various shapes
Types of Structural Steel Pipe EN 10219 S355JRH
EN 10219 Carbon Steel Pipe S355JRH Oiled
EN 10219 S355jrh LSAW CS Pipe
En10219 Standard S355jrh Material Shs Rhs Steel Tube
EN10219 S355JRH Seamless Pipe
EN10219 S355JRH Mild Carbon Steel Pipe
EN10219 S355JRH Welded and ERW Tubes
Mechanical Properties Table of EN 10219 S355JRH
| Steel Grade | Minimum Yield Strength MPa | Tensile Strength MPa | Elongation | Impact Energy | |||
| Steel name | Steel number | thickness(mm) | thickness(mm) | % (min) | (KV J) (min) | ||
| ≤ 16 | 16> to ≤40 | ≤3 | > 3 ≤40 | ≤40 mm | test temperature | ||
| S235JRH | 1.0039 | 235 | 225 | 360-510 | 360-510 | 24 | 20℃ |
Are you searching for Structural Steel Pipe EN 10219 S355JRH Specification ? find here Grade S355JRH Seamless Pipes complete information
Specification Standard of EN 10219 S355JRH Welded Steel Pipe
| Standard | ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
|---|---|
| Outer Dimensions | 4.0mm – 60.0mm |
| size | 5.0 - 1219.2 mm |
| Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Schedule | SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Length | Single Random, Double Random, Standard & Cut length Pipe |
| Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc |
| Form | are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
| Types | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW din 2391 st35 pipe |
| End | Plain End, Beveled End, Treaded Pipe, Screwed ends |
| Application | Dairy Pipe, Oil Pipe, Gas Pipe, Fluid Pipe, Boiler Pipe for Chemical Industry |
| Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| manufacturing Technique | Cold drawn, hot drawn, bright annealed, solid solution, hot extruding |
| Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
| Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report, Heat Treatment Charts, Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP) |
see Stal S355JRH Hollow Section and S355JRH+N ERW Tubes Properties
Chemical Composition of S355JRH Hollow Section
| Steel Grade | Type of deoxidation | % by mass, maximum | ||||||
| steel name | steel number | C | SI | Mn | P | S | Nb | |
| S235JRH | 1.0039 | FF | 0.17 | 1.4 | 0.04 | 0.04 | 0.009 | |
Check Price List and Testing of EN 10219 S355JRH Square Tubing
Testing of Stal S355JRH ERW Pipe
- Flaring Test
- Hydrostatic Test
- Radiography Test
- Flattening Test
- Micro Test
- Pitting Resistance Test
- Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
- Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
- Macro Test
- Mechanical Testing Such as Tensile, Elongation, Reduction of Area
- Intergranular Corrosion (IGC) Test
- Hardness Test
Application of EN 10219 S355JRH LSAW Welded Steel Pipe
- Heat Exchangers
- Paper & Pulp
- Ship Building
- Power Plants
- Boilers
- Marine Applications
- Condensers