1.0576 Hot Finished CHS material and S355J2H Square Pipe supplier in India
Low cost, low carbon steel is available in EN 10210 Pipe. Carbon, silicon, manganese, phosphorus, and sulphur are all included in the substance. The length, wall thickness, and outer diameter of DIN EN 10210 pipes vary. The outside diameters of the pipes range from 21.3 mm to 1219.2 mm. Single random, double random, and custom cut to length lengths are all possible. The EN 10210-2 Pipe providers manufacture the pipes in schedules ranging from sch20 to XXS and heavier, with wall thicknesses ranging from 0.5mm to 20mm. The pipes are hollow, hot-finished pieces made of fine- and non-alloyed steel. There are different grades, and each grade has unique mechanical characteristics. With 22% elongation at break, EN 10210 steel pipe has a minimum yield strength of 355 MPa and a minimum tensile strength of 630 MPa. The pipes can be welded or made to be seamless. While the welded pipes are welded from sheets or plates, the seamless pipes are cold drawn or hot rolled from ingots. The EN 10210 S355j2h Steel Pipe is utilised in delicate applications such as machinery and tools, and the EN 10210-1 Seamless Pipe has superior dimensional precision. The S355j2h EN 10210 Tube has smaller dimensions than pipes. The outside diameter of the tubes typically ranges up to 152mm. When greater strength is required in structural applications, the EN 10210 Square Tube is used. The product's square cross sectional gives it additional geometric strength. Applications for the EN 10210 Tube include power generating, petrochemical, oil and gas, and food manufacturing.
Carbon Steel Seamless Pipe EN 10210 Grade S355J2H
Carbon Steel S355J2H Square Tube
DIN EN 10210 Pipe
Table of contents
- Specification Standard of EN 10210-1 seamless pipe
- Chemical Composition of S355J2H Square Tube
- material Mechanical Properties of EN 10210 s355j2h Table
- Sizes Chart of EN 10210 Grade S355J2H Hot Finished CHS Tube
- S355j2h EN 10210 tube Tolerance
- length Tolerance of EN 10210 S355J2H Carbon Steel Seamless Pipe
- Heat Treatment of EN 10210 s355j2h steel pipe
- S355J2H EN 10210 Pipes Sizes
- S355j2h Seamless Tube Types
EN 10210 S355J2H steel pipe Manufacturer In India
Specification Standard of EN 10210-1 seamless pipe
| Standard | EN 10210 |
|---|---|
| Standard Name | Hot Finished Structural Hollow Sections of Non-alloy and Fine Grain Steels |
| Grade | S235JRH,S275JOH,S275J2H,S355JOH,S355J2H,S355K2H,S275NH, S275NLH,S355NH,S355NLH,S420NH,S420NLH,S46INH,S460NLH Supplier and Manufacturer |
| Dimension Range in MM | 21.3-1219 |
| Supplier & Distributors Located in | Manama, Santiago, Baroda, Ankara, Thiruvananthapuram, Muscat, Ernakulam, Ranchi, Lagos, Jamshedpur, Chennai, New Delhi, Janeiro, Port of Spain, Pimpri Chinchwad, Karachi, Gimhae si, Mumbai, Gurgaon, India, Kolkata, Surat, Indore, Perth, Bangalore, Khobar, Gujarat, Ludhiana, Caracas, Dammam, Bengaluru, Howrah, Bogota, Tau, Rajkot, Ahvaz, Ludhiana, Montreal, Ahmedabad, Calgary, London, Nagpur, Courbevoie, Noida, Hyderabad, Melbourne, Kuwait, Vadodara, Sydney, Mexico, Kanpur, Abu Dhabi, Tehran, Istanbul, Riyadh, Coimbatore |
Ask for Latest Price list and Composition of S355J2H Square Tube and En 10210 S355j2h Material
Chemical Composition of S355J2H Square Tube
| Element | Carbon | Silicon | Manganese | Phosphorous | Sulfur |
|---|---|---|---|---|---|
| S355J2H | Maximum 0.22 | Maximum 0.55 | Maximum 1.6 | Maximum 0.03 | Maximum 0.03 |
Material Mechanical Properties of EN 10210 s355j2h Table
| Specification | EN10210 S355J2H |
|---|---|
| Yield Strength ReH Min, N/mm2 = T ≤ 16mm | 355 |
| Tensile Strength Rm N/mm2 = 3 ≤ T ≤ 100 MM | 470 – 630 |
| Impact properties Minimum Ave energy at -20°C | 27 |
| Minimum Elongation % T ≤ 40mm on gauge length 5.65. √S0 | 22 |
Sizes Chart of EN 10210 Grade S355J2H Hot Finished CHS Tube
| Wall Thickness | Outer Diameter Sizes in Inch |
|---|---|
| .010 | 1/16, 1/8, 3/16 |
| .020 | 1/16, 1/8, 3/16, 1/4, 5/16, 3/8 |
| .120 | 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 2, 2 1/4, 2 1/2, 3 |
| .083 | 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 1 7/8, 2, 2 1/2,3 |
| .012 | 1/8 |
| .016 | 1/8, 3/16 |
| .028 | 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 3/4, 1, 1 1/2, 2 |
| .035 | 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 16, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 2, 2 1/4 |
| .134 | 1 |
| .049 | 3/16, 1/4, 5/16, 3/8, 1/2, 16, 5/8, 3/4, 7/8, 1, 1 1/8, 1 1/4, 1 1/2, 1 5/8, 2, 2 1/4 |
| .065 | 1/4, 5/16, 3/8, 1/2, 16, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 1 3/4, 2, 2 1/2, 3 |
| .095 | 1/2, 5/8, 1, 1 1/4, 1 1/2, 2 |
| .109 | 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 |
| .250 | 3 |
| .125 | 3/4, 1, 1 1/4, 1 1/2, 2, 3, 3 1/4 |
| .375 | 3 1/2 |
Leading Supplier of Carbon Steel S355j2h En 10210 Pipe. View Tolerance Chart of EN 10210-1 Grade S355J2H Structural Hollow Sections
S355j2h EN 10210 tube Tolerance
| Execution | Size Range | Outer Diameter Tolerance | Tolerance |
|---|---|---|---|
| Hot-rolled Tube | OD – 80 Outer Diameter > 80 Wall < 12 Wall = 12 | ± 0.4 ± 0.5 % of Outer Diameter | ± 0.7 ± (5 % x wall thickness + 0.1 |
| Cold Worked tubecold rolled or cold drawn | OD < 40 Outer Diameter 40 - 80 Outer Diameter > 80 Wall Thickness< 6 Wall Thickness6 = 8 Wall Thickness > 8 | + 0.30/- 0 *+ 0.35/- 0 *+ 0.40/- 0 | ± 0.30 ± 0.35 ± 0.40 |
| Hot rolled peeled tube | All sizes Wall < 12 Wall = 12 | + 0.25/- 0 mm | ± 0.8 ± (5 % x wall thickness+ 0.2) |
length Tolerance of EN 10210 S355J2H Carbon Steel Seamless Pipe
| Component length in MM | Outer Diameter 30 To 100 in MM | Outer Diameter 100 To 254 in MM |
|---|---|---|
| 600 To 1200 | + 3.0/- 0 | + 4.0/- 0 |
| 10 To 100 | + 1.0/- 0 | + 2.0/- 0 |
| 1200 to 5000 | + 5.0/- 0 | + 6.0/- 0 |
| 100 To 600 | + 2.0/- 0 | + 3.0/- 0 |
Heat Treatment of EN 10210 s355j2h steel pipe
| Hot Forming | Heat Treatment | |||
|---|---|---|---|---|
| Temperature °C | Cooling Type | Normalizing | Stress relieving | Cooling Type |
| 700 To 750 | Air | 850 To 950°C | 580 To 630°C | Air |
Check Dimensions and Size Chart of S355J2H EN 10210 pipe and rectangular tube
S355J2H EN 10210 Pipes Sizes
| 1/8 Inch IPS(.405 Inch Outer Diameter) | 3 1/2 Inch IPS( 4.000 Inch Outer Diameter) |
| 3/8 Inch IPS(.675 Inch Outer Diameter) | 5 Inch IPS( 5.563 Inch Outer Diameter) |
| Schedule 40, 80 | Schedule 10, 40, 80, 160, XXH |
| 1/4 Inch IPS(.540 Inch Outer Diameter) | 4 Inch IPS(4.500 Inch Outer Diameter) |
| Schedule 10, 40, 80 | Schedule 10, 40, 80, 160, XXH |
| Schedule 10, 40, 80, 160, XXH | Schedule-40 (.375) |
| Schedule 10, 40, 80 | Schedule 10, 40, 80, 160, XXH |
| 1/2 Inch IPS(.840 Inch Outer Diameter) | 6 Inch IPS(6.625 Inch Outer Diameter) |
| Schedule 5, 10, 40, 80, 160, XXH | Schedule 5, 10, 40, 80, 120, 160, XXH |
| 3/4 Inch IPS(1.050 Inch Outer Diameter) | 8 ” IPS(8.625 Inch Outer Diameter) |
| Schedule 10, 40, 80, 160, XXH | Schedule 5, 10, 40, 80, 120, 160, XXH |
| 1 Inch IPS:(1.315′ Outer Diameter) | 10 Inch IPS(10.750 Inch Outer Diameter) |
| Schedule 5, 10, 40, 80, 160, XXH | Schedule 10, 20, 40, 80 (.500), TRUE 80(.500) |
| 2 Inch IPS(2.375 Inch Outer Diameter) | 16 Inch IPS(16.000 Inch Outer Diameter) |
| 1-1/4 Inch IPS(1.660 Inch Outer Diameter) | 12 Inch IPS(12.750 Inch Outer Diameter) |
| 1-1/2 Inch IPS(1.900 Inch Outer Diameter) | 14 Inch IPS(14.000 Inch Outer Diameter) |
| Schedule 10, 40, 80, 160, XXH | Schedule10 (.188), Schedule40 (.375) |
| Schedule 10, 40, 80, 160, XXH | Schedule 10, 20, 40(.375), TRUE40(.406), Schedule80(.500) |
| Schedule 10, 40, 80, 160, XXH | Schedule10(.188), Schedule40(.375) |
| 2 1/2 Inch IPS(2.875 Inch Outer Diameter) | 18 Inch IPS (18.000 Inch Outer Diameter) |
| 3 Inch IPS( 3.500 Inch Outer Diameter) | Schedule 5, 10, 40, 80, 160, XXH |
S355j2h Seamless Tube Types
S355j2h Pipe
S355j2h Welded Pipe
S355j2h Tube
S355j2h Square Tube
En 10210-1 S355j2h Hot Rolled Seamless Pipe
En 10210-2 S355j2h ERW Pipes
Steel Grade S355j2h Boiler and Heat Exchanger Pipes