EN 10305-1 E355+sr seamless cold drawn steel tubes supplier
The characteristics and dimensions of EN 10305-1 E355 carbon steel pipes are clearly defined. The degree of surface roughness is exact. The E355 grade of the material has a maximum carbon content of 0.22%. The EN 10305-1 E355 Carbon Steel Tube is a mild steel tube that can be utilised for structural strength and fluid transportation in the majority of high pressure and high temperature applications. The minimum yield strength and tensile strength of En 10305-1 steel tubes are 490 MPa and 630 MPa, respectively. The mechanical and physical properties of the Din En 10305-1 Material are provided by its concentrations of silicon, manganese, phosphorus, and sulphur. The E355+sr Din En 10305-1 Tube is suitable for oil field fluid transfer applications due to its resistance to corrosion, wear and tear, and toughness. Additionally, the E355+sr Din En 10305-1 Seamless Tube is more affordable than its high alloy competitors with comparable properties. While seamless pipes have lower diameters, Acier E355 welded pipes can have bigger diameters. Walls of either type may be thicker than 100mm. Round, square, hydraulic, and other types of pipes are available. The most popular type of these pipes and tubes is the E355 steel round tube. Utilized in precise applications where dimensional correctness is essential is the E355 steel seamless pipe. There are certain well-known brands that have been on the market for a while and have earned the trust of the public, like Acero E355 Seamless Tubes. These Stahl E355 Tubing can be welded using standard methods without the use of filler materials or additional stages. We are a provider that offers cut-to-length pipes in every grade, saving you money. Supplier of EN 10305-1 Grade E355 Seamless Tubes, Rakesh Metals carries pipes with any surface treatment.
E355+sr Din En 10305-1 Seamless Tube
EN 10305-1 Grade E355 CS Seamless Tubes
EN 10305-1 E355 Pipes
Table of contents
- EN 10305-1 E355 Carbon Steel Tube Different Types
- Acero E355 Seamless Tubes Specification chart
- En 10305-1 Steel Tubes Chemical Composition
- Material Size Chart of Din En 10305-1 CS Pipe
- Mechanical Properties of EN 10305-1 E355 CS Pipes
- Dimension Tolerance of E355 Steel Round Tube
- E355 Steel Seamless Pipe Dimensional Length
- Size of Acier E355 Welded Tube
- E355+sr Din En 10305-1 Tube Equivalent
- Stahl E355 Tubing Inspection
Acier E355 Welded Pipe and Stahl E355 Tubing sizes available from 6 -20 NPS
EN 10305-1 E355 Carbon Steel Tube Different Types
DIN EN 10305-1 s45c seamless cold drawn Carbon Steel tubes
EN 10305-1 Seamless Precision Welded steel tube
schedule 80 CS seamless steel pipe EN 10305-1
EN 10305-1 Seamless steel tube
EN 10305-1 DIN 1630 OD 14inch Seamless cold drawn pipe
DIN EN 10305-1 Cold drawn seamless steel tube
EN 10305-1 E215 E235 E255 E355 OD 2mm - 60mm Seamless Pipe
Cold Drawn EN 10305-1 E355 1.0580 Welded Steel Tube
EN 10305-1 E235+N Cold drawn seamless steel tubes
Check Specification of Din En 10305-1 Material and Acero e355+n ERW/ Round Tubes
Acero E355 Seamless Tubes Specification chart
| size in Mm | 5 To 1219.2 |
|---|---|
| Schedule | Schedule XS, Schedule 160, Schedule 40, Schedule XXS, Schedule 80 Supplier and Manufacturer |
| Standard | JIS, EN, DIN, GB, IS, AISI, ASME, ASTM |
| Seamless Pipe Size in MM | 4 to 219 Wall thickness: 0.5 to 20 |
| Welded Pipe Size in MM | 5 to 1219.2 |
| Seamless Tube Size in MM | 3.35 To 101.6 |
| Length | Double Random, Single Random, Standard & Cut length |
| Wall Thickness in inch | 0.020 to 0.220 |
| Type | U bent, Straight, Seamless, Round, Welded, EFW, Tube Coil, ERW, Hydraulic, LSAW, Square, Fabricated, Boiler, Rectangular |
| Finish | BA, Polished, AP, MF |
| Form | Square, Hydraulic, Rectangular, Clad, U bent, Boiler, Hollow, LSAW, Straight, Round, |
| End | Beveled, Plain, Treaded |
| Pipe Marking | All Pipes are marked as follows: Supplier or Manufacturer’s Name, Standard, Grade, OD, Thickness, Length, Heat Number |
| Supplier & Distributors Located in | Sydney, Rajkot, Indore, Mumbai, Tehran, Ernakulam, Thiruvananthapuram, Riyadh, Gujarat, Gurgaon, Kanpur, Abu Dhabi, Bengaluru, Perth, Kuwait, Manama, Khobar, Ahvaz, Port of Spain, Nagpur, Muscat, Caracas, Lagos, London, Surat, Istanbul, Karachi, Mexico, Janeiro, Ludhiana, Melbourne, Courbevoie, Baroda, Dammam, Jamshedpur, Coimbatore, Bangalore, Ahmedabad, Chennai, Noida, Montreal, Calgary, Howrah, Ludhiana, Kolkata, Tau, Pimpri Chinchwad, Santiago, Hyderabad, India, Vadodara, Gimhae si, New Delhi, Ankara, Ranchi, Bogota |
Manufacturers of EN 10305-1 E355 Carbon Steel Tube. Check Properties of En 10305-1 Steel Tubes
En 10305-1 Steel Tubes Chemical Composition
| Carbon | Silicon | Manganese | Phosphorous | Sulphur | Molybdenum | Nickel | Chromium | Copper | Others |
|---|---|---|---|---|---|---|---|---|---|
| maximum 0.17 | maximum 0.35 | maximum 1.20 | 0.025 | 0.025 | – | – | – | – | – |
| maximum 0.22 | maximum 0.55 | maximum 1.60 | 0.025 | 0.025 | – | – | – | – | – |
| maximum 0.21 | maximum 0.35 | 0.40-1.10 | 0.025 | 0.025 | – | – | – | – | – |
| 0.20-0.30 | maximum 0.40 | 1.20-1.50 | 0.035 | 0.035 | – | – | – | – | – |
| 0.32-0.39 | maximum 0.40 | 0.50-0.80 | 0.035 | 0.035 | maximum 0.10 | – | maximum 0.40 | – | – |
| 0.42-0.55 | maximum 0.40 | 0.50-0.80 | 0.035 | 0.035 | maximum 0.10 | – | maximum 0.40 | – | – |
| 0.16-0.22 | 0.10-0.50 | 1.30-1.70 | 0.03 | 0.035 | – | – | – | – | V0.08-0.15 |
| 0.22-0.29 | maximum 0.40 | maximum 1.50 | 0.035 | 0.035 | 0.15-0.25 | maximum 0.40 | – | – | – |
| 0.22-0.29 | maximum 0.40 | 0.60-0.90 | 0.035 | 0.035 | 0.15-0.30 | maximum 0.40 | 0.90-1.20 | – | – |
| 0.38-0.45 | maximum 0.40 | 0.60-0.90 | 0.035 | 0.035 | 0.15-0.30 | – | 0.90-1.20 | – | – |
| maximum 0.10 | maximum 0.05 | maximum 0.70 | 0.025 | 0.015 | – | – | – | – | Al min 0.025 |
| maximum 0.17 | maximum 0.35 | maximum 1.20 | 0.025 | 0.015 | – | – | – | – | – |
| maximum 0.22 | maximum 0.55 | maximum 1.60 | 0.025 | 0.015 | – | – | – | – | – |
Material Size Chart of Din En 10305-1 CS Pipe
| 1/8 Inch IPS(.405 Inch Outer Diameter) | 3 1/2 Inch IPS( 4.000 Inch Outer Diameter) |
| 3/8 Inch IPS(.675 Inch Outer Diameter) | 5 Inch IPS( 5.563 Inch Outer Diameter) |
| Schedule 40, 80 | Schedule 10, 40, 80, 160, XXH |
| 1/4 Inch IPS(.540 Inch Outer Diameter) | 4 Inch IPS(4.500 Inch Outer Diameter) |
| Schedule 10, 40, 80 | Schedule 10, 40, 80, 160, XXH |
| Schedule 10, 40, 80, 160, XXH | Schedule-40 (.375) |
| Schedule 10, 40, 80 | Schedule 10, 40, 80, 160, XXH |
| 1/2 Inch IPS(.840 Inch Outer Diameter) | 6 Inch IPS(6.625 Inch Outer Diameter) |
| Schedule 5, 10, 40, 80, 160, XXH | Schedule 5, 10, 40, 80, 120, 160, XXH |
| 3/4 Inch IPS(1.050 Inch Outer Diameter) | 8 ” IPS(8.625 Inch Outer Diameter) |
| Schedule 10, 40, 80, 160, XXH | Schedule 5, 10, 40, 80, 120, 160, XXH |
| 1 Inch IPS:(1.315′ Outer Diameter) | 10 Inch IPS(10.750 Inch Outer Diameter) |
| Schedule 5, 10, 40, 80, 160, XXH | Schedule 10, 20, 40, 80 (.500), TRUE 80(.500) |
| 2 Inch IPS(2.375 Inch Outer Diameter) | 16 Inch IPS(16.000 Inch Outer Diameter) |
| 1-1/4 Inch IPS(1.660 Inch Outer Diameter) | 12 Inch IPS(12.750 Inch Outer Diameter) |
| 1-1/2 Inch IPS(1.900 Inch Outer Diameter) | 14 Inch IPS(14.000 Inch Outer Diameter) |
| Schedule 10, 40, 80, 160, XXH | Schedule10 (.188), Schedule40 (.375) |
| Schedule 10, 40, 80, 160, XXH | Schedule 10, 20, 40(.375), TRUE40(.406), Schedule80(.500) |
| Schedule 10, 40, 80, 160, XXH | Schedule10(.188), Schedule40(.375) |
| 2 1/2 Inch IPS(2.875 Inch Outer Diameter) | 18 Inch IPS (18.000 Inch Outer Diameter) |
| 3 Inch IPS( 3.500 Inch Outer Diameter) | Schedule 5, 10, 40, 80, 160, XXH |
Mechanical Properties of EN 10305-1 E355 CS Pipes
| Tensile Strength | Elongation | ||
|---|---|---|---|
| MPa Minimum | MPa Minimum | ksi Minimum | Percentage |
| 340 | 480 | – | 25 |
| 490 | 630 | – | 22 |
| 440 | 570 | – | 21 |
| – | – | – | – |
| 460 | - | - | 21 |
| 540 | - | - | 18 |
| 550 | 700 | - | 22 |
| - | - | - | - |
| - | - | - | - |
| - | - | - | - |
| 290 | 430 | - | 30 |
| 350 | 480 | - | 25 |
| 490 | 630 | - | 22 |
Dimension Tolerance of E355 Steel Round Tube
| Grade | Sizes | Outer Diameter Tolerance | Tolerance |
|---|---|---|---|
| Hot rolled | Outer Diameter – 80 Outer Diameter > 80 WT < 12 Wall = 12 | ± 0.4 ± 0.5 % of Outer Diameter | ± 0.7 ± (5 % x WT + 0.1 |
| Cold Worked, cold rolled and cold drawn | Outer Diameter < 40 Outer Diameter 40 - 80 Outer Diameter > 80 WT < 6 WT 6 = 8 WT > 8 | + 0.30/- 0 *+ 0.35/- 0 *+ 0.40/- 0 | ± 0.30 ± 0.35 ± 0.40 |
| Hot rolled peeled tube | All sizes WT < 12 Wall = 12 | + 0.25/- 0 mm | ± 0.8 ± (5 % x WT+ 0.2) |
E355 Steel Seamless Pipe Dimensional Length
| Component length in MM | Outer Diameter 30 To 100 in MM | Outer Diameter 100 To 254 in MM |
|---|---|---|
| 10 To 100 | + 1.0/- 0 | + 2.0/- 0 |
| 1200 To 5000 | + 5.0/- 0 | + 6.0/- 0 |
| 600 To 1200 | + 3.0/- 0 | + 4.0/- 0 |
| 100 To 600 | + 2.0/- 0 | + 3.0/- 0 |
Best price of E355+sr Din En 10305-1 Tube and E355 Steel Seamless Pipe ex Mumbai, India
Size of Acier E355 Welded Tube
| Wall Thickness | Outer Diameter Sizes in Inch |
|---|---|
| .010 | 1/16, 1/8, 3/16 |
| .020 | 1/16, 1/8, 3/16, 1/4, 5/16, 3/8 |
| .120 | 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 2, 2 1/4, 2 1/2, 3 |
| .083 | 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 1 7/8, 2, 2 1/2,3 |
| .012 | 1/8 |
| .016 | 1/8, 3/16 |
| .028 | 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 3/4, 1, 1 1/2, 2 |
| .035 | 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 16, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 2, 2 1/4 |
| .134 | 1 |
| .049 | 3/16, 1/4, 5/16, 3/8, 1/2, 16, 5/8, 3/4, 7/8, 1, 1 1/8, 1 1/4, 1 1/2, 1 5/8, 2, 2 1/4 |
| .065 | 1/4, 5/16, 3/8, 1/2, 16, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 5/8, 1 3/4, 2, 2 1/2, 3 |
| .095 | 1/2, 5/8, 1, 1 1/4, 1 1/2, 2 |
| .109 | 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 |
| .250 | 3 |
| .125 | 3/4, 1, 1 1/4, 1 1/2, 2, 3, 3 1/4 |
| .375 | 3 1/2 |
E355+sr Din En 10305-1 Tube Equivalent
| Product | Deutsches Institut für Normung | European Standards | British Standards | National Futures Association | American Society for Testing and Material | American Society Of Mechanical Engineers |
|---|---|---|---|---|---|---|
| EN 10305-1 E235 | – | EN 10305-1 E235 | – | – | – | – |
| EN 10305-4 E355 | – | EN 10305-4 E355 | – | – | – | – |
| EN 10305-1 E355 | – | EN 10305-1 E355 | – | – | – | – |
| EN 10305-1 26Mn5 | DIN 26Mn5 | EN 10305-1 26Mn5 | – | ASTM SAE 1526 | – | – |
| EN 10305-1 E255 | – | EN 10305-1 E255 | – | – | – | – |
| EN 10305-1 C35E | DIN 17204 Ck35 | EN 10305-1 C35E | NFA A 35-552 XC 32 | ASTM A519 1035 | ASME SA 519 1035 | – |
| EN 10305-1 E41020V1 | – | EN 10305-1 E41020V1 | – | – | – | – |
| EN 10305-1 C45E | DIN 17204 Ck45 | EN 10305-1 C45E | – | ASTM A519 1045 | ASME SA 519 1045 | – |
| EN 10305-1 26Mo2 | – | EN 10305-1 26Mo2 | – | – | – | – |
| EN 10305-1 42CrMo4 | DIN 17204 42CrMo4 | EN 10305-1 42CrMo4 | NFA EN – 42CrMo4 | ASTM A 519 4142 | – | – |
| EN 10305-1 25CrMo4 | DIN 17200 25CrMo4 | EN 10305-1 25CrMo4 | NFA EN . 25CrMo4 | – | – | – |
| EN 10305-4 E235 | – | EN 10305-4 E235 | – | – | – | – |
| EN 10305-4 E215 | – | EN 10305-4 E215 | – | – | – | – |
Stahl E355 Tubing Inspection
| Optional | Flattening test or expansion test (option 20) | M | One per tested batch |
| Roughness measurement | Not applicable | One per tested batch | |
| NDT in order to identify longitudinal discontinuity | Not applicable | Individual | |
| NDT in order to identify leaks | |||
| Mandatory | Chemical analysis | M | M |
| Tensile testing | M | One per tested batch | |
| Dimension verification | M | M | |
| Visual inspection | M | M |
| Inspection or test types | Test frequency | |
|---|---|---|
| Internal test | Acceptance test | |
| Dimension verification | M | M |
| Chemical analysis | M | M |
| NDT in order to identify leaks | Individual | Individual |
| Tensile testing | M | One per tested batch |
| Visual inspection | M | M |
| Flattening test or extension test | M | Two per tested batch |