PN En 10216-5 Tc1 Tubes & UNI EN-10216-4 Seamless Pipes supplier
The material used to create EN 10216-5 pipe is also known as X2CrNiMOSil8-5-3 or 1.4424. This substance's composition consists of carbon, silicon, manganese, phosphorus, sulphur, 18% chromium, 5% nickel, and nitrogen. The EN-10216-4 Seamless Tubes are constructed from a material that is similar but has a different chemical makeup. The material is resistant to oxidation, corrosion, and acid because of its chemical composition, which contains significant amounts of chromium and nickel. The ASTM A312 En 10216-5 Welded Pipe adheres to this international standard as well as others, like ASTM A790. The material has a minimum tensile strength of up to 900 MPa, a minimum yield strength of 480 MPa, and a break elongation rate of 30%. While square, rectangular, and hydraulic pipe forms are also available, stainless steel En 10216-5 round pipes are the most popular. Cold drawing and hot rolling processes are used to create the En 10216-5 Tc1 Seamless Pipe. The pipes' dimensions can vary depending on the use. Depending on the needs of the application, lengths can go up to 12000mm and beyond. Depending on the needs of the application, the Din En 10216-5 Tc1 ERW Pipes' diameter can range up to 1219.2mm or more, with wall thicknesses exceeding 100mm. The Tube Inox En 10216-5's typical wall thickness ranges from 0.5mm to 20mm. The material may be welded using standard techniques without the need for additional steps.
EN 10216-5 Pipe
Seamless Tubes EN-10216-4
Din En 10216-5 Tc1 ERW Pipes
Table of contents
Thickness of EN 10216-5 Pipe
| Hot rolled | Outside Diameter, mm | Tolerance |
|---|---|---|
| 30≤Outer Diameter ≤219.1, WT≤0.01*Outer Diameter and WT≤4 | T1, ±15% or ±0.6mm | |
| 30≤Outer Diameter ≤219.1 | T2, ±12.5% or ±0.4mm | |
| 219.1＜Outer Diameter ≤610, WT≤0.05*Outer Diameter | +22.5%/-15% | |
| 219.1＜Outer Diameter ≤610, 0.05*Outer Diameter ＜WT≤0.09*Outer Diameter | T1, ±15% or ±0.6 MM | |
| 219.1＜Outer Diameter ≤610, WT>0.09*Outer Diameter | T2, ±12.5% or ±0.4 MM | |
| Cold Drawn | Outside Diameter | Tolerance |
| Outer Diameter ≤219.1 | T3, ±10% or ±0.2 MM | |
| Outer Diameter ≤219.1 | T4, ±7.5% or ±0.15 MM | |
| Length in MM: 5800; 6000; 6096; 7315; 11800; 12000 Maximum developed length: 32 meters, also U bending can be offered, each leg length can be 15.24 meters. |
||
EN-10216-4 Seamless Tubes Various types
En 10216-5 Carbon Seamless Steel Tubes
BS 10216-5 seamless steel tubes for pressure vessel boiler
En 10216-5 Cold Drawn / Cold Rolled Seamless Pipe
10216-5 ERW Tubes
En 10216-5 Tubes
En 10216-5 Hot Rolled Welded Pipes
Check Astm A312 En 10216-5 Welded Pipe size range and Mechanical Properties, PED approved Din En 10216-5 Tc1 ERW Pipes Supplier in India
Welded Pipe Mechanical Composition Table of Astm A312 En 10216-5
| Tensile Strength | Elongatio | Yield Strength |
|---|---|---|
| 700 To 900 | 30 minimum | 480 minimum |
Stainless Steel En 10216-5 Round Pipes Chemical Properties
| Carbon | Silicon | Manganese | Phosphorus | Sulfur | Chromium | Nickel | Molybdenum | Nitrogen |
|---|---|---|---|---|---|---|---|---|
| 0.03 Maximum | 1.4 To 2.0 | 1.2 To 2.0 | 0.035 Maximum | 0.015 Maximum | 18.0 To 19.0 | 4.5 To 5.2 | 2.5 To 3.0 | 0.05 To 0.10 |
Check dimensions and specification of Stainless Steel En 10216-5 Round Pipe and Tubes
En 10216-5 Tc1 Seamless Pipe Spec Chart
| Standard | EN 10216-5 |
| Equivalent Standards | DIN 17458, DIN 17456, GOST 9940-81, GOST 9941-81, ASME SA789, ASTM A790, ASTM A789, ASME SA790 |
| Material | X2CrNiMoSi18-5-3, 1.4424 |
| Equivalent Materials | SAF1805, S31500 |
| Pipe Marking | All Pipes are marked as follows: Supplier or Manufacturer’s Name, Standard, Grade, OD, Thickness, Length, Heat Number |
| Supplier & Distributors Located in | Melbourne, Calgary, Howrah, Lagos, Muscat, Chennai, Hyderabad, Janeiro, Mumbai, Kanpur, Noida, Ankara, Istanbul, Manama, Mexico, Bogota, Kuwait, Port of Spain, Pimpri Chinchwad, Rajkot, Surat, Bangalore, Riyadh, India, Nagpur, Santiago, Baroda, Tau, Indore, Thiruvananthapuram, Ahmedabad, Karachi, Ludhiana, Perth, Khobar, Ludhiana, Gimhae si, Bengaluru, Caracas, Ernakulam, Gujarat, Montreal, Ahvaz, Gurgaon, Kolkata, Coimbatore, Tehran, Sydney, New Delhi, Vadodara, Courbevoie, London, Ranchi, Jamshedpur, Dammam, Abu Dhabi/td> |
Manufacturer of Tube Inox En 10216-5, Refer NF EN 10216-5 Boiler Pipe Tolerance
Tolerance EN 10216-5 Pipe Dimension
| Hot rolled | Outside Diameterin mm | Tolerance |
|---|---|---|
| 30≤ Outer Diameter≤219.1 | D2, ±1% or ±0.5mm | |
| 219.1＜ Outer Diameter≤610 | D1, ±1.5% or ±0.75mm | |
| Cold Drawn | Outside Diameter in mm | Tolerance |
| Outer Diameter≤219.1 | D3, ±0.75% or ±0.3mm | |
| Outer Diameter≤219.1 | D4, ±0.5% or ±0.1mm |
EN 10216-5 ERW Pipe Size Chart
| 1/8 Inch IPS(.405 Inch Outer Diameter) | 3 1/2 Inch IPS( 4.000 Inch Outer Diameter) |
| 3/8 Inch IPS(.675 Inch Outer Diameter) | 5 Inch IPS( 5.563 Inch Outer Diameter) |
| Schedule 40, 80 | Schedule 10, 40, 80, 160, XXH |
| 1/4 Inch IPS(.540 Inch Outer Diameter) | 4 Inch IPS(4.500 Inch Outer Diameter) |
| Schedule 10, 40, 80 | Schedule 10, 40, 80, 160, XXH |
| Schedule 10, 40, 80, 160, XXH | Schedule-40 (.375) |
| Schedule 10, 40, 80 | Schedule 10, 40, 80, 160, XXH |
| 1/2 Inch IPS(.840 Inch Outer Diameter) | 6 Inch IPS(6.625 Inch Outer Diameter) |
| Schedule 5, 10, 40, 80, 160, XXH | Schedule 5, 10, 40, 80, 120, 160, XXH |
| 3/4 Inch IPS(1.050 Inch Outer Diameter) | 8 ” IPS(8.625 Inch Outer Diameter) |
| Schedule 10, 40, 80, 160, XXH | Schedule 5, 10, 40, 80, 120, 160, XXH |
| 1 Inch IPS:(1.315′ Outer Diameter) | 10 Inch IPS(10.750 Inch Outer Diameter) |
| Schedule 5, 10, 40, 80, 160, XXH | Schedule 10, 20, 40, 80 (.500), TRUE 80(.500) |
| 2 Inch IPS(2.375 Inch Outer Diameter) | 16 Inch IPS(16.000 Inch Outer Diameter) |
| 1-1/4 Inch IPS(1.660 Inch Outer Diameter) | 12 Inch IPS(12.750 Inch Outer Diameter) |
| 1-1/2 Inch IPS(1.900 Inch Outer Diameter) | 14 Inch IPS(14.000 Inch Outer Diameter) |
| Schedule 10, 40, 80, 160, XXH | Schedule10 (.188), Schedule40 (.375) |
| Schedule 10, 40, 80, 160, XXH | Schedule 10, 20, 40(.375), TRUE40(.406), Schedule80(.500) |
| Schedule 10, 40, 80, 160, XXH | Schedule10(.188), Schedule40(.375) |
| 2 1/2 Inch IPS(2.875 Inch Outer Diameter) | 18 Inch IPS (18.000 Inch Outer Diameter) |
| 3 Inch IPS( 3.500 Inch Outer Diameter) | Schedule 5, 10, 40, 80, 160, XXH |
Din En 10216-5 Tc1 Tube Sizes
| Wall Thickness | Outer Diameter Sizes in Inch |
|---|---|
| .012 | 1/8 |
| .010 | 1/8, 1/16, 3/16 |
| .065 | 3/4, 2 1/2, 1 1/4, 1 5/8, 1/2, 5/16, 7/8, 1, 1 3/4, 3/8, 16, 5/8, 1 1/2, 2, 3, 1/4 |
| .020 | 1/16, 3/8, 5/16, 1/4, 1/8, 3/16 |
| .125 | 3, 3/4, 1 1/4, 1, 1 1/2, 3 1/4, 2 |
| .120 | 1 1/2, 1/2, 2, 3/4, 3, 2 1/4, 1, 5/8, 2 1/2, 7/8, 1 1/4 |
| .016 | 1/8, 3/16 |
| .028 | 3/16, 3/8, 5/16, 3/4, 1 1/2, 1/2, 1/4, 1, 2, 1/8 |
| .035 | 1/4, 5/8, 3/4, 3/8, 2 1/4, 16, 3/16, 1 5/8, 1/2, 2, 7/16, 5/16, 1, 1/2, 7/8, 1 1/4, 1/8, 1 |
| .134 | 1 |
| .049 | 1 5/8, 2, 1 1/8, 1 1/4, 5/16, 3/4, 2 1/4, 1, 5/8, 1/2, 16, 3/16, 7/8, 3/8, 1/4, 1 1/2 |
| .083 | 3/4, 1 1/4, 1/2, 1/4, 5/8, 7/8, 2 1/2,3, 1 7/8, 1, 1 5/8, 3/8, 1 1/2, 2 |
| .095 | 1, 1-1/4, 1-1/2, 5/8, 2, 1/2, |
| .109 | 1/2, 1, 2, 1-1/4, 3/4, 1-1/2, |
| .250 | 3 |
| .375 | 3 1/2 |